PERFORMANCE
RANGE
| Flow
Rate |
upto
2300 LPH . |
 |
| Dynamic
Head |
upto
32 m. |
| Operating
Limits |
|
| Maximum
Water Temperature |
+60oC |
| Maximum
Ambient Temperature |
+45oC |
| Maximum
Suction Lift |
8
m |
Ratings
0.37kw (0.5 HP ) |
Voltage
Range
Single Phase 160 V to 250 V |
DESIGN
PRINCIPLE
The ANSP
Series pumps are Single impeller pumps. The shape of the impeller
blades rapidly transfers radial recirculation motion to the water on
entry to the pump between the impeller blades and the double channel, machined on each side of the pump
body. Since each of the numerous
blades help transfer energy, the water pressure increases progressively
as it passes from the suction opening to the delivery opening, ensuring
an even non - pulsing flow and high pressure.
PUMP
APPLICATION AND INSTALLATION
non - jamming pumps are suitable for pumping clean & clear water
not containing abrasive particles aggressive to the pump components.
These pumps are suitable for suction lifts upto 8 m depth and
operate at high heads and low discharge with stable performance
curves. Variations in discharge are low in spite of large variations
in head. These pumps are practically unaffected by the presence of large
amounts of entrained air in the water being pumped. Common applications
are marginal farming / orchards / residential buildings / bungalows
/ hotels / hospitals / clubs / lawn sprinklers / car - washing / boosting
water supply for high pressure pumping application / water circulation.
These pumps are easy to install with pipe connections to the suction
and delivery openings. The pumps must preferably be installed in a horizontal
position in a covered area protected against weather.
SALIENT FEATURES
| Pump |
| •
Volute Casing
|
Cast
iron with non - corrosive coating and a gun metal insert - prevents
jamming.
|
| •
Impeller |
Brass
forged. |
| •
Adaptor |
Cast
Iron with a gun metal insert. |
| •
Mechanical Seal |
Ceramic
and Graphite - higher life. |
| Motor |
| Totally
enclosed fan cooled ( TEFC ) for continuous operation - single phase.
|
•
Insulation
|
Class
' F' - higher reliability
|
| •
All Motors |
Permanent
Split Capacitor - no centrifugal switch - higher reliability |
| •
Thermal Protection |
Built
- in thermal protector - higher reliability. |
| •
Body |
Cast
Iron - Rugged construction |
| •
Shaft |
Stainless
steel grade - AISI 410 - higher life. |
| •
Bearings |
Sealed
Ball bearings - greased for life of reputed make (generally SKF)
|
| •
Protection |
IP
54. |
WARRANTY
One year from date of supply
Note - The Product shown may differ from the actual supply in view of
continuous changes in Design.
Performance
subject to continuous improvement.
